Orbisphere M1100 Luminescent dissolved oxygen sensor, 0-40 ppm, with 28 mm Orbisphere fitting

Orbisphere M1100 Luminescent dissolved oxygen sensor, 0-40 ppm, with 28 mm Orbisphere fitting
Produktnr.: M1100-S00H
Stykpris Kontakt os
Afsendes indenfor 2 uger

Begrænset vedligeholdelse og årlig kalibrering

The M1100 sensor provides immediate oxygen readings with a measurement frequency of two seconds. The instrument carries consistent readings with no drift for 12 months without calibration (when utilising standard weekly CIP processes), surpassing other optical sensors that display significant drift after only a few months in similar conditions.

Ved optisk teknologi begrænses vedligeholdelsen

The M1100 pioneered the use of luminescent technology in brewing applications (bypass) and as a result, the sensor doesn’t require the replacement of membranes or any electrolytes. Additionally, the sensor’s accuracy is unaffected by process changes or pressure shocks, further reducing maintenance. Annual maintenance is limited to just a few minutes for a zero-point calibration. Chemicals are not required for this process, making the task easier and safer without reducing measurement precision.

Iltmåling i højt niveau med stor nøjagtighed

The M1100-L sensor has a lower detection level of 0.6 ppb. This highly accurate instrument’s readings are essential to control low oxygen levels in beer production, to decrease unnecessary line stoppages, and to increase production uptime.

High Level Oxygen Measurement with Accurate ppm

The M1100-H sensor has a range of 0-40 ppm, and is ideal for use in wort applications, for example. Even in this harsh wort environment, the instrument maintains very good accuracy and minimal drift. Only a yearly maintenance and calibration will be required in most cases.

Hvad er der i boksen

Sensor only and manual.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.

Specifikationer

Applikation: Beverage (bypass)
Certificeringer: 2004/108/EC - EN 61326-1
Display opløsning: 0.1 ppb
Driftsbetingelser: 0 - 95 % non-condensing relative humidity
flowhastighed: 28 mm Orbisphere fitting
Flowhastighed: 50 - 300 mL/min
Garanti: 24 måneder
Hvad er der i boksen: Sensor only and manual.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.
IP klasse, kapsling: Sensor resistant to all common CIP methods
Kalibrering: To punkter ved kapslens udskiftning: nulstilling og luft, en ved brug af luft
Laveste detektionsgrænse: 0.015 ppm
Måleområde: 0 - 40 ppm DO (dissolved oxygen)
Materiale: 316 L Stainless Steel (1.4435), Silicone
Nøjagtighed: ± 0,02 ppm eller 3 % som er større end
Omgivelsestemperatur: -5 - 100 °C (23 - 212 °F)
Parameter: Oxygen
Repeterbarhed: ± 0.015 ppm eller 2 % som er større end
Reproducerbarhed: ± 0,02 ppm eller 3 % som er større end
Resistance: Sensoren er modstandsdygtig over for de mest gængse CIP metoder
Responstid: (90%)< 10 (течна фаза)
Temperaturområde: Præcis fra -5 til 50 °C
Modstandsdygtig over for temperaturer fra -5 til 100 °C
Tryk: 1 - 20 bar absolut
Vægt: M1100 12mm: 0,6 kg
M1100 28mm: 0,74 kg
Væskeberørte materialer: 316 L Rustfri stål (1.4435), Silicone