CLT10 sc Total chlorine sensor, pHD differential sensor (on panel)

CLT10 sc Total chlorine sensor, pHD differential sensor (on panel)
Produktnr.: LXV45B.98.23022
Stykpris Kontakt os

Compatible with Hach's "Plug and Play" Digital Controllers

The CLF10 sc and CLT10 sc Chlorine Analysers are designed to be used with all Hach digital SC controllers. Set up is fast and easy, and the system is compatible with the full line of Hach digital sensors.

No Reagent Replacement, No Waste Stream

Chlorine measurement with the CLF10 sc and CLT10 sc amperometric technology eliminates the need for routine reagent replacement and waste stream management.

EPA Compliance

The CLF10 sc and CLT10 sc analysers can be used for reporting chlorine residual measurements in accordance with EPA Method 334.0. Additionally, Hach has created a suite of laboratory products and methods to help with startup and quality control procedures required for Method 334.0.

Advanced Diagnostics

CLF10 sc and CLT10 sc advanced diagnostics alert you when the process has changed or the instument needs servicing. Diagnostic features include the Cal Watch algorithm for warning of pH and chlorine calibration deviation and a non-contacting sample flow sensor for notification of insufficient sample flow.

Real-time Process Monitoring and Control

The CLF10 sc and CLT10 sc Chlorine Analysers allow for real-time monitoring and control of disinfection processes.

Hvad er der i boksen

CL10sc Panel, 1 m Digital Extension Cable, pHD Differential Sensor, Panel Manual, Chlorine Sensor Manual, pHD Sensor Manual

Specifikationer

Beskrivelse: CLT10sc Total Chlorine Sensor pHD Differential Sensor (On Panel)
Bredde: 495.3 mm
Certificeringer: CE compliant for conducted and radiated emissions:
- CISPR 11 (Class A limits)
- EMC Immunity EN 61326-1 (Industrial limits)
Additional certifications when connected to an sc controller
Detektionsgrænse: 30 ppb (0.03 ppm)
Dimensioner: Sensor Only: 195 mm x 25 mm (7.68 in x 0.98 in)
Flowhastighed: 30 - 50 L/h, optimal is 40 L/hour
flowhastighed: Metric
Forbindelse afløb: ½" ID
Forbindelse prøve: ¼" OD
Garanti: 24 måneder
Hvad er der i boksen: CL10sc Panel, 1 m Digital Extension Cable, pHD Differential Sensor, Panel Manual, Chlorine Sensor Manual, pHD Sensor Manual
Indstillinger: pHD Differential Sensor
Interferenser: Free chlorine: monochloramine, chlorine dioxide, ozone, and chalk deposits.
Total chlorine: chlorine dioxide, ozone and chalk deposits
Kabelforbindelse: 5 pin, M12 connector
Kabellængde: 1 m (between gateway and SC controller)
Kalibreringsmetode: 1-point or 2-point (zero and slope) calibration
Kompatibel med: SC200, SC1000, SC4500. All controllers sold separately
Kontrolenhed: Panel only
Længde: Sensor: 195 mm
Målemetode: Reagentless, electrochemical, three-electrode amperometric system
Måleområde: 0 - 20 ppm Cl₂
Materiale: Panel: Corrosion-resistant, fully-submersible (stainless steel, PVC, silicon rubber and polycarbonate)
Monteringsmetode: Panel or Wall Mounting
Nøjagtighed: Free Chlorine: ± 3 % of the reference test** (DPD) at constant pH less than 7.2 (±0.2 pH unit)
  Free Chlorine: ± of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
  Total Chlorine: ± 10 % of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
  Total Chlorine: ± 20 % of the reference test** (DPD) at stable pH greater than 8.5
Omgivelsestemperatur: 0 - 45 °C
Opbevarings-betingelser: -20 °C - 60 °C dry
Parameter: Total Chlorine
pH måleområde: 4 - 9 pH
pH Monitoring Required?: With differential pH sensor
Prøvetemperatur: 5 - 45 °C
Repeterbarhed: 30 ppb eller 3%, alt efter hvilken er størst
Responstid: Free Chlorine: 140 s or less for 90% change (T90)
at a stable temperature and pH
  Total Chlorine: 100 s or less for 90% change (T90)
at a stable temperature and pH
Strømkrav (volt): Ingen
Temperaturkompensation: Internal temperature compensation in the sensor
  Interne temperatuurcompensatie in de sensor
Trykområde: 0.5 bar, no pressure impulses and/or vibrations
Vægt: Approximately 5.5 kg
Panel and empty panel-mounted components only