Amtax sc Ammonium analyser on-site, outdoor, 0.05 - 20 mg/L NH4-N, 10 m

FORÆLDET VARE

Amtax sc Ammonium analyser on-site, outdoor, 0.05 - 20 mg/L NH4-N, 10 m
Produktnr.: LXV421.99.12001

FORÆLDET VARE

Wide measuring range

Amtax sc Ammonium Analysers are available in four measuring ranges. With detection limits as low as 0.02 mg/L and as high as 1000 mg/L, the Amtax sc can be used anywhere in the wastewater treatment process, from the influent or start of the nitrification process with high NH4-N levels to the effluent with only low ammonium levels. In the lowest range it can also be used for drinking water applications.

Fast response time for control of nutrient removal process

Nutrient removal is a critical and sensitive process in wastewater treatment. Quick response is vital for optimal operation. The fast response time of only 5 minutes, including sample preparation and selection of the measurement interval, make the Amtax sc one of the fastest responding ammonium analysers on the market.

Easy installation

The Amtax sc Analyser is designed to be installed at the measuring location, including outdoor locations. The housing is weatherproof and lockable so that the analyser can be installed right at the basin, even in the toughest climates.
The Amtax sc easily mounts to a wall, rail- and stand-mounting options are available. Due to its SC technology the anlyser is ready for use in the network of the SC controller ("plug-and-play").

Low maintenance and simple operation

The analyser calibrates and cleans itself automatically and is equipped with comprehensive self-diagnostic routines. With at least a 3-month supply of reagents (for 5 min interval), the Amtax sc analyser offers the most economical reagent consumption. Reagents and wear parts are easily accessible.

Optional with sample preparation or second channel

The Amtax sc analyser works with a low-maintenance filtration system (e.g. Filtrax) that removes particles larger than 0.15 µm. The filtrate is sent to the analyser while air bubbles constantly clean the filtration membrane.
The analyser is also available as two channel version for measurement at two different sampling points.

Hvad er der i boksen

0.05 - 20 mg/L NH₄-N, 230 VAC Amtax sc Ammonium Analyser, Filterprobe sc with 10 m heated hose, 3 month supply of all necessary consumables at 5 minute cycle time, user manuals.

Specifikationer

Antal kanaler: 1
Detektionsgrænse: 0.05 mg/L NH4-N
Dimensioner (H x B x D): 720 mm x 540 mm x 390 mm
Flow: 1 - 20 L/h sample (free of suspended solids)
Garanti: 24 måneder
Hvad er der i boksen: 0.05 - 20 mg/L NH₄-N, 230 VAC Amtax sc Ammonium Analyser, Filterprobe sc with 10 m heated hose, 3 month supply of all necessary consumables at 5 minute cycle time, user manuals.
Indendørs / udendørs: Udendørs
Kabellængde: 2 m fixed data cable at analyser
  2 m fixed power cable at analyser
Kapslingsklasse: IP55
Klorid-tolerance: Max. Cl- concentration: 1000 mg/L
Laveste detektionsgrænse: 0.05 mg/L NH4-N
Luftfugtighed ved drift: 95 % relative humidity, non-condensing
Måleinterval: 5 - 120 min, adjustable per 5 min.
Målemetode: GSE (Gas Selective Electrode) with screw-on membrane cap
Måleområde: 0.05 - 20.0 mg/L NH4-N
Måle princip: NH4 is being converted to NH3 gas, which is being measured at the GSE.
Materiale: ASA/PC UV-resistant
Nøjagtighed: Using standard solutions: 3 % + 0.05 mg/L
Omgivelsestemperatur: -20 - 45 °C
Opbevarings-betingelser: 4 - 55 °C less than 95% relative humidity
Parameter: Ammonium
pH måleområde: 5 - 9 pH
Prøve kvalitet: Ultra filtrated or comparable
Prøve niveau: Sample level in basin and filtration system must be below analyzer.
Prøvetagning option: With Filterprobe (10 m heated hose)
Prøvetemperatur: 4 - 40 °C
Reproducerbarhed: 2 % + 0,05 mg/L
Responstid: < 5 min
  < 5 minutes, including sample preparation
Sikringsbeskyttelse: Via SC1000 controller or power box. Maximum of 2 analysers per SC1000 or power box
Specielle fordele: Lockable housing; automatic cleaning and calibration; extensive self-diagnostics
Strømkrav (Hz): 50 Hz
Strømkrav (volt): 230 V AC, forsynet af Power Box eller SC1000
Trykområde: -30 - 50 mbar with continuous sample preparation; at overflow vessel
Udgang: Current output, relays and bus communication via SC controller
Vægt: Without sample preparation system and without chemicals: 31 kg